Wireless MediaMVP® is the link between your TV and your PC, allowing you to watch
and listen to PC based music, videos, digital pictures and Internet radio on your TV set.
wMVP (as it is also called) works with either wireless 802.11G or wired 10/100 Mbit
Ethernet networks. You can use up to 24 wired MediaMVPs on a home network,
or up to four wireless MediaMVPs. Listen to PC music on one TV set while watching
an MPEG movie on another!
wMVP is simple to install: Install the MediaMVP server application on your
PC and connect the wMVP to your TV set. MediaMVP has a Network Setup program
to allow you to choose your wireless Access Point or a wired router, hub or
switch. In just a few minutes you’ll be able to play your PC based music,
videos or digital pictures on your TV set!
Navigate through your PC media from your TV set, selecting MPEG or DivX® videos,
individual music titles to listen to or digital pictures to watch.
You can simultaneously play a picture slideshow while listening to a
complete music program. Or play a music playlist (MusicMatch, Winamp
and Windows Media playlists supported).
Play MPEG movies on your TV set. Create MPEG videos on your PC with
Hauppauge's WinTV (optional), then play those videos on your TV set through MediaMVP.
MediaMVP works with videos recorded with WinTV, WinTV-PVR and with our international
digital TV receivers. MediaMVP also supports most standard MPEG-1, MPEG-2 and DivX® videos.
MediaMVPs remote control gives you complete control over your PC based media.
Pause, fast forward and rewind through videos, plus play and pause music and digital
picture shows. You can adjust the audio volume from MediaMVPs remote control,
so you won’t need to use your TV's remote control!
Connect MediaMVP to your home theater system! Connect MediaMVPs’
video and stereo audio outputs to your home theater system and you'll be able
to watch your digital videos and pictures on your TV set while listening to MediaMVP
audio through your home theater speakers!
MediaMVP can be connected directly to your PC or laptop. All you need
is an Ethernet cross over cable (available at most computer shops) to directly
connect MediaMVP with your laptop.
Technically speaking:
MediaMVP is a Linux based digital media receiver. Inside MediaMVP is a high performance IBM
PowerPC processor and a hardware MPEG audio/ video decoder for MPEG-1/2 videos and MP3
music.
MediaMVP receives digital media from the PC via the Ethernet LAN, decodes the
media and outputs audio/video to the TV set through the S-Video and composite A/V
connectors. Digital pictures are software decoded by MediaMVP’s processor.
The MediaMVP Server application creates menus on the PC, which are transmitted
over the LAN to the MediaMVP, where it provides the on-TV-screen display.
MediaMVP receives commands from the supplied remote control, and sends these
commands to the PC server, where the remote control commands are executed.
| TV Requirements |
 |
Composite or S-Video input |
 |
Audio input, stereo or mono |
| PC System Requirements |
 |
PC with 750MHz processor or faster for DivX® playback:
2.2GHz or faster 256MB RAM minimum |
 |
Microsoft® Windows® 2000 or Windows XP |
 |
Internet Explorer 6.0 |
 |
CD-ROM drive for loading software |
| Network Requirements |
 |
802.11G wireless network, with your PC connected
to the Access Point via a wired Ethernet connection |
| OR |
|
 |
One 10/100 RJ-45 port on a Router, Hub or Switch |
| OR |
|
 |
Direct connect from MediaMVP to PC
via crossover LAN cable (cable not supplied) |
| Included in the Wireless MediaMVP Model 1016 package |
 |
MediaMVP with an 802.11G antenna and an RJ45
jack for wired Ethernet networks |
 |
Stand |
 |
Wall mounted power supply - 6v |
 |
Remote control with batteries |
 |
MediaMVP Installation CD-ROM |
 |
MediaMVP QuickInstall Guide |
 |
1.5 meter A/V cable set, with composite video,
left audio and right audio cables |
 |
1.5 meter Ethernet cable |
|